!

Tanto unsigned attributed to a work of Seiryu-shi KANETSUGU with) Kiri Phoenix design Tanto Koshiare

K536(T5011)

Shin-shin-to Late Edo period (Kouka era/circa 1844-) Rikuzen
Length of cutting edge 25.9cm A bit on inward curve Width of base 24.5mm Thickness of base 7.2mm

NBTHK(Hozon) certificate

with) Kiri Phoenix design Tanto Koshiare

Kozuka

kozuka2286a

Bugyo police magistrate's offce

Unsigned attributed to a work of Kyo-kanagu-shi

Shakudo ground Nanako-ji surface Takabori inlay Gold/Silver/Copper Iroe, Gold back panel

95.3mm x 14.4mm 6.4mm thick

Tanto signed KANESADA (Nosada/2nd generation)

F56982(T3715)

Koto on the latter half of Muromachi period (Bunmei 4 - Meiou era/1474 - 1500) Mino
Length of cutting edge 23.3cm Inward curvature Width of base 22.5mm Thickness of base 6.1mm

NBTHK(Tokubetsu Hozon) certificate

 

 

Wakizashi signed Sagami-no-kami Fujiwara YASUYUKI

O93813(W8571)

Shinto Early Edo perido (Kanbun era/about 350 years ago) Owari
Length of cutting edge 56.6cm Curvature 0.8cm Width of base 32.2mm Width of Yokote 23.5cm Thickness of base 9.0mm

NBTHK(Tokubetsu Hozon) certificate

 

Sendmail

Wakizashi signed Ō-MICHI (DAIDŌ)

T282081(W5016)

Koto closing years of Muromachi period (Tensho era/circa 1573-91) Mino
Length of cutting edge 36.4cm Curvature 0.8cm Width of base 30.6mm Thickness of base 6.4mm

NBTHK(Hozon) ceretificate

 

Iron ground Round Openwork Tuba

Tuba2372a

A pair of Antler with Hatchet openwork design

Iron Ground, Open work, Double Hits-ana punches, Square Mimi edge

Signed : Tanshu-ju SADAMASA

76.6 mm x 75.7 mm 4.1 mm thick (Seppa-dai)

Tanto signed KANEMOTO with) Black Hakeme brush traces finish scabbard Chisa-katana koshirae

O116372(T5015)

Koto end of Muromachi period (Kyoroku-Tenbun era circa 1528-) Mino
Length of cutting edge 28.2 cm Curvature 0.3cm Width of base 26.0mm Thickness of base 5.5mm

NBTHK(Hozon) certificate

with) Black Hakeme brush traces finish scabbard Chisa-katana koshirae

Sendmail

Katana signed Hizen-ju Musashi-no-kami Fujiwara MASANAGA with) Blue pearl of inlay brushing trace lacquered scabbard Uchikatana Koshirae

A68549(S2179)

Early Edo period (circa Kanbun 1-4/1661-65) Hizen
Length of cutting edge 72.0cm Curvature 1.5cm Width of base 32.2mm Width of base 22.0mm Thickness of base 7.2mm

NBTHK(Tokubetsu Hozon) certificate

with) Blue pearl of inlay brushing trace lacquered scabbard Uchikatana Koshirae

NBTHK(Hozon) certificate for Tsuba

Sendmail

Iron Round shape Tsuba

Tuba2064a

Kouhone (Nuphar japonica) openwork design

Signed : Choshu-hagi-ju TOSHIKATA

Iron ground, Round shape, Nikubori carving, Openwork, Square Mimi edge with with well-round contour

70.5 x 67.8 mm 4.8 mm thick / Seppa base

Wakizashi signed KANEFUSA-saku with) Inro-style notches all sorts of various lacquered pattern Chisa-katana Koshirae

S27184(W7594)

Koto End of Muromachi period (Eiroku era/circa 1558-) Mino
Length of cutting edge 35.7cm Curvature 0.5cm Width of base 30.3mm Thickness of base 5.0mm

NBTHK(Hozon) certificate for Wakizashi

with) Inro-style notches all sorts of various lacquered pattern Chisa-katana Koshirae

NBTHK(Hozon) for Tsuba/NBTHK(tokubetsu Kicho) for Tsuba/NBTHK(Hozon) for Kozuka/Kogai

Sendmail

Wakizashi signed (KIKU crest) Yamashiro-no-kami Fujiwara KUNIKIYO

G24180(W6617)

Shinto Early Edo period (circa Kanei 10/on about 1633) Echizen
Length of cutting edge41.7cm Curvature0.8cm Width of base31.0mm Thickness of base6.6mm

NBTHK(Tokubetsu Hozon) certificate

 

Tanto signed HIROFUSA-saku with)Tamenuri burgundy lacquered scabbard Higo-style Tanto Koshirae

M13116(T5992)

Shin-shin-to End of Edo period (Ansei era /circa 1854-) Ise
Length of cutting edge 22.1cm No curvature Width of base 24.5mm Thickness of base 7.6mm

NBTHK(Hozon) certificate

with)Tamenuri burgundy lacquered scabbard Higo-style Tanto Koshirae

Katana signed Hizen-ju Harima-daijo Fujiwara TADAKUNI with)Black lacquered brushing trace surface crest of Maru-ni-juji crest Handachi-style Koshirae mounting

N16336(S8908)

Shinto early Edo period (Latter half of Kan'ei era / 1640 -) Hizen
Length of cutting edge71.1cm Curvature1.7cm Width of base28.6mm Thickness of base7.2mm Width of Yokote18.1mm

NBTHK(Tokubetsu Hozon) certificate

Saya-gaki written by Dr. Sato Kanzan

with)Black lacquered brushing trace surface crest of Maru-ni-juji crest Handachi-style Koshirae mounting

Sendmail

Wakizashi signed Hōki-no-kami Fujiwara NOBUTAKA

S16637(W8083)

Shinto Early Edo period (kan'ei 10 - Kanbun 2/circa 1633-62) Owari
Length of cutting edge 53.9cm Curvature 1.1cm Width of base 32.4mm Width of Yokote 23.1mm Thickness of base 7.2mm

NBTHK(Hozon) certificate

Sendmail

 

 

Katana signed Houki-no-kami Fujiwara NOBUTAKA (1st gen.)

E7825(S826)

Shinto Early Edo period (Keicho era/circa 1596-) Owari
Length of cutting edge 75.9cm Curvature 1.2cm Width of base 31.3mm Width of Yokote 23.1mm Thickness of base 7.5mm

NBTHK(Hozon) certificate
NTHK(Shoshin) certificate

Sendmail 

katana signed Soushu-ju HIROMASA

H7581(S5903)

Koto End of Muromachi period (Eisho era/circa 1504-) Sagami
Length of cutting edge 65.3cm Curvature 2.1cm Width of base 31.8mm Width of Yokote 22.5mm Thickness of base 7.1mm

NBTHK(Hozon) certificate

Sendmail 

 

Iron pentagonal rectangular shape Tsuba

Tuba251Sa

Flower petal design

Unsigned attributed to a work of SHOAMI school

Pentagonal rectangular shape, Iron ground,  Sukibori carving, Sukinokoshi Mimi edge, both hitsu-ana punches

73.2 x 73.6 mm Mimi edge 5.2 mm thick

Iron ground Round Rectangular Character Openwork Tuba

Tuba2309a

Iron Ground Open work, Double Hits-ana punches, Round Mimi edge

Signed : Snake, the 10th calender sign of Heisei YOSHIYUKI-saku

79.2 mm x 78.5 mm 5.4 mm thick (Mimi edge)

Iron Round shape Tsuba

Tuba2429a

Bamboo grass leaves  a Hare design

Signed SHOAMI

Oval shape, Iron ground, Hammered surface, Sukidashi-Takabori carving, Silver/Shakudo/Gold Inlay, Hammered Mimi edge

79.0mm x 76.1mm 4.0mm thick (Mimi-edge)

NBHK(Hozon) certificate

Katana unsigned attributed to a work of Rai KUNIYUKI

E44739(S833)

Koto Middle of Kamakura period (Kougen era/circa 1256) Yamashiro
Length of cutting edge 73.6cm Curvature 2.2cm Width of base 29.1mm Width of Yokote 20.5mm Thickness of base 7.0mm

NBTHK(Hozon)certificate

Polish and Sayagaki written by Ono Koukei (living national treasure) 

Sendmail 

Iron cross rectangular shape Tsuba

Tuba2280a

Herons reed pipe design

Unsigned

Iron ground Cross rectangular shape Sukidashi carving, Gold/Shakudo/Copper Iroe, Double Hitsu-ana punches

85.2mm x 78.8mm 4.0mm thick (Seppa-dai)

Tachi signed Bishu Osafune MORIHISA with) Brown stone surface lacquered scabbard Uchikatana Koshirae

H52231(S825)

Koto Nanbokucho period (Teiji era/circa1362-) Bizen
Length of cutting edge 73.8cm Curvature 1.5cm Width of base 29.0mm Width of Yokote 17.8mm Thickness of base 6.9mm

NBTHK(Hozon) certificate

Sayagaki written by Dr. Sato Kanzan

with) Brown stone surface lacquered scabbard Uchikatana Koshirae

 

Sendmail 

Tanto signed Akama Nyudo NAONOBU with) Black lacquered Aikuchi-style Tanto Koshirae

S29485(T8635)

Shin-shin-to End of Edo period (Ansei era/circa 1854 -) Dewa
Length of cutting edge 21.6cm No curvature Width of base 26.4mm Thickness of base 8.0mm

NBTHK(Hozon) certificate

with) Black lacquered Aikuchi-style Tanto Koshirae

Sendmail

Sun-no-bi Tanto signed Bishu Osafune YUKIHISA In the 8th month Ouei 29th

A16729(W2777)

Early Muromachi period (Ouei 29/1422) Bizen
Length of cutting edge 30.6cm Curvature 0.1cm Width of base 26.7mm Thickness of base 5.5mm

NBTHK(Hozon) certificate

additional old Shirasaya with Sayagaki

 

 

Tanto signed KANEYUKI

T236360(T5012)

Later Muromachi period (Daiei era/circa 1521-) Mino
Length of cutting edge 29.6cm Curvature 0.3cm Width of base 26.7mm Thickness of base 6.8mm

NBTHK(Hozon) certificate

 

 

katana signed KANEMITSU

E15229(S834)

Koto End Muromachi period (Eisho era/circa 1504-) Mino
Length of cutting edge 78.2mm curvature3.5cm Width of base 31.2mm Width of Yokote 18.4mm Thickness of base 7.5mm

NBTHK(Hozon) certificate
Reported in Mino Toko Meikan

Sendmail

 

Iron Round shape Tsuba

Tuba2453a

Genji-ko - the way of enjoying incense burning
configured Five longitudinal lines design

Signed YAMAKICHI-bei (4th gen.)

Round, Iron ground, Hammered surface, Open work, hammered edge of Mimi, Both Hitsuana punches filled with copper

86.2mm x 86.0mm 3.5mm thick (Mimi-edge)

NBHK(Hozon) certificate